News center

When using a UV light cleaning machine, the following precautions should be taken: 1. The equipment should be placed reasonably. 2. Avoid direct exposure. 3. Machine operators must undergo relevant training before taking up their posts and must develop good work habits. 4. After completing daily work, maintain the equipment and keep the surrounding environment in good condition. 5. Regularly check the cleanliness of the guide rails and sliders, and lubricate them once a month.

The power and irradiation time of ultraviolet curing lamps need to be determined according to specific curing requirements. Generally, it is necessary to ensure that the ultraviolet rays have sufficient intensity, and the irradiation time is generally 30-60 minutes.

UV lamps have the following common application areas: 1. Photochemical reactions: using the characteristics of ultraviolet light for photochemical reactions, product curing, sterilization and disinfection, medical testing, etc. 2. Printed products: Surface curing and drying treatment used to cure UV ink products. 3. Medical industry: surgical sterilization, disinfection of sterile environments, etc.

The installation precautions for UV lamps are as follows: 1. Before installation, it is necessary to confirm whether the main power is turned off, and a warning sign must be hung on the machine power control console. 2. Before installing the lamp tube, it must be matched with the corresponding transformer, capacitor or ballast trigger. If not matched, the lamp tube will burst or shorten its service life.

Choosing a good UVLED curing equipment requires comprehensive consideration from the following aspects: 1. Spectral characteristics: The spectral characteristics of the UVLED curing machine need to match the curing material you are using. Different curing materials have different spectral requirements, so ensure that the selected curing machine can provide a suitable wavelength range.